| |
Max |
Min |
| Label width: |
4.25" (107.95mm) |
.75" (19.05mm) |
| Liner/media width: |
4.25" (107.95mm) |
1.0" (25.4mm) |
| Label height/length: |
24" (609.6mm) |
0.75" (19.05mm) |
| Gap between labels: |
10" (254mm) |
0.10" (2.5mm) |
| Width of thru-hole opening: |
0.5" (12.7mm) |
0.25" (6.325mm) |
| Distance from edge of media to edge of thru-hole: |
2.25" (57mm) |
0.20" (5.06mm) |
| Reflective/Black Mark Width*: |
N/A |
0.1" (2.54mm) |
| Max Outer Diameter (OD): |
5.0"(127mm) |
N/A |
| Inner Core Diameter (ID): |
2.0" (50.8mm) |
N/A |
| Total Thickness (Liner + Label)**: |
0.010” (10 mil) |
N/A |
| Distance from edge of media to edge of label: |
Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset. |
* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.
Compatible Accessories
