Print Method:	Thermal inkjet; Pigment ink
Print Resolutions:	Up to 4800 dpi
Print Speeds:	Draft Mode: 6” per second Normal Mode: 1.8” per second High Quality Mode: 0.8” per second
Print Head:	Replaceable Print Head
Inks:	Individual ink cartridges for Cyan, Magenta, Yellow and Black
Colors:	16.7 million
Color Matching:	Z-Color™ Color Matching Software
Max. Print Width:	8.25" (210mm)
Media Width:	8.375" (213mm)
Media Types:	Roll-fed pressure-sensitive labels, or roll-fed tags
Media Sensing:	Moveable see-through sensor for die-cut labels; reflective sensor for labels and tags with black stripe; can use continuous and pre-printed labels and tags
Supply Roll:	6" (152mm) maximum diameter on 3" (76mm) core.
Ink Level Warning:	Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending)
Indicator Lights:	Power, Pause, Ink
Controls:	Pause, Feed, Unload, Cancel
Operating Systems:	Windows® 7/8/10+  Mac OS X 10.8+
Data Interface:	USB 2.0; External Control Port
Label Design Software:	BarTender UltraLite Primera Edition included. Can also be used with most other popular label design and graphics software programs
Electrical Rating:	12VDC, 5.0A
Power Requirements:	100-240VAC, 50/60 Hz, 1.7A
Certifications:	UL, UL-C, CE, FCC Class A
California Prop 65:	WARNING: Cancer and Reproductive Toxin - www.p65warnings.ca.gov
Weight:	45 lbs. (20.4 kg)
Dimensions:	19.5"W x 10.2"H x 20.5"D (495mmW x 259mmH x 521mmD)
Connectivity:	Hi-Speed USB 2.0; Built-in Wired Ethernet 10/100 Base-TX (RJ45) Networking; Built-in wireless 802.11b/g/n Networking
Included:	Bartender Ultralite software for Windows, 4”X3” Tuffcoat™ Extreme White Polyester starter roll and starter CMYK ink set.

More information can be located in the LX2000 User's Manual
 

	Max	Min
Label width:	8.25" (209.6mm)	0.5" (12.7mm)
Liner/media width:	8.375" (212.7mm)	1.5" (38.1mm)
Label height/length:	24" (609.6 mm)	0.5" (12.7mm)
Gap between labels:	10" (254mm)	0.1" (2.5mm)
Width of thru-hole opening:	0.5" (12.7mm)	0.25" (6.4mm)
Distance from edge of media to edge of thru-hole:	2.25" (57mm)	0.2" (5.1mm)
Reflective/Black Mark Width*:	N/A	0.1" (2.54mm)
Max Outer Diameter (OD):	6"(152.4mm)	N/A
Inner Core Diameter (ID):	3" (76.2mm)	3" (76.2mm)
Total Thickness (Liner + Label)**:	0.010” (10 mil)	N/A
Distance from edge of media to edge of label:	Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset.

 
* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.